By Garland Boulanger. driveway. Published at Saturday, February 02nd, 2019 - 22:35:37 PM.
First, check to see if the company can handle a wide variety of surfaces apart from just block paved driveways. After all, your premises might have forecourts, car parks and access areas laid with a number of different surfaces, and many or all of them might require cleaning. Instead of choosing different services to clean each region, it would be more economical to choose a company that can handle a wide variety of cleaning jobs.
Hold your level on this line at the house end and either raise or lower it until it is level, if you have a gap under the level and the line on the end facing the pavement, then you have the correct direction of fall in the driveway. When you are satisfied with the height and fall of the line, wrap some tape around the pegs to the underside of your line, this will save having to go through the same process again if the line is moved for any reason.
The other way is to have 2/3 compacted sand and a third loose sand which you screed to the desired height, this is easier to screed but can result in soft spots. Establish the finished height of your block paving use a block as a guide and push it down into the sand until it is 5mm higher than the finished height to allow for the final compacting once all the block paving is laid.
You need a flat bed for your pavers to lay on, to do this you can use 18mm galvanised steel electrical conduit, they are not expensive but are better than using timber because the piece of timber or aluminum used to screed the sand will slide along them much easier.
Any content, trademark’s, or other material that might be found on the Arewacloud website that is not Arewacloud’s property remains the copyright of its respective owner/s. In no way does Arewacloud claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.