By Cendrillon Picard. driveway. Published at Tuesday, January 29th, 2019 - 10:49:39 AM.
When you’re spending the money to have your driveway or parking lot professionally paved, you don’t want the asphalt to deteriorate any sooner than necessary. Sealcoat the surface to protect your walking and driving areas from wear and tear.
Brush kiln dried sand over the entire area making sure all the joints are full to the top. Then give them a compacting with the plate compactor, leave surplus sand on top of the the driveway so when the vibrating plate passes over it, it will spread about filling any joints which may require more sand.
Two Set up your level line. You will need to knock 2 timber or steel pins into the ground, one at the house end of the driveway and the other at the pavement side. Next, attach a tight builder’s nylon line at what will be the finished height of your block paving, this line should be approx 10mm higher than the pavement and 150mm lower than the damp proof course to allow for final compaction of the block paving.
The first up would probably be the resin bonded driveway. This is a fairly new edition to the driveway family and a fairly new concept to the industry. What is a resin bonded driveway? To make it simple a resin bonded driveway appears to be made to look like a traditional pea shingle driveway but on closer inspection we find that it is a small layer of angular grit held together with glue.
Any content, trademark’s, or other material that might be found on the Arewacloud website that is not Arewacloud’s property remains the copyright of its respective owner/s. In no way does Arewacloud claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.