By Manette Faure. driveway. Published at Tuesday, January 22nd, 2019 - 19:24:40 PM.
When you’re spending the money to have your driveway or parking lot professionally paved, you don’t want the asphalt to deteriorate any sooner than necessary. Sealcoat the surface to protect your walking and driving areas from wear and tear.
Firstly You will need to remove your existing driveway, this could be either concrete, tarmac or concrete flags. To make life easy hire a mini digger from a local tool hire company and you will clear this stage in a day. If you want to however this can be done by hand but will take much longer to do!
You need a flat bed for your pavers to lay on, to do this you can use 18mm galvanised steel electrical conduit, they are not expensive but are better than using timber because the piece of timber or aluminum used to screed the sand will slide along them much easier.
Three Place a geotextile layer (weed control fabric) on top of the subsoil to the total area of your driveway. This eliminates mixing of the sub soil or clay and the hardcore yet still allows water to flow away freely.Hold this in place using a few bricks or blocks and keep it tight whilst adding the hardcore.
Any content, trademark’s, or other material that might be found on the Arewacloud website that is not Arewacloud’s property remains the copyright of its respective owner/s. In no way does Arewacloud claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.