Published at Tuesday, February 05th, 2019 - 19:50:48 PM. driveway. By Daisi Loiseau.
Two Set up your level line. You will need to knock 2 timber or steel pins into the ground, one at the house end of the driveway and the other at the pavement side. Next, attach a tight builder’s nylon line at what will be the finished height of your block paving, this line should be approx 10mm higher than the pavement and 150mm lower than the damp proof course to allow for final compaction of the block paving.
If you want to seal a driveway or parking lot that is several years old and has already begun to deteriorate, the paving contractor must first repair the damaged asphalt. This may involve filling any holes or cracks in the pavement, as well as smoothing out rough areas. It’s also a good idea to clean up any oil stains before applying sealcoating, as once they’re sealed in, those stains are permanent. In general, you should apply a new coat of driveway sealer every two to three years. Resealing and minor repairs will almost always be less expensive than having to completely replace the pavement.
Any content, trademark’s, or other material that might be found on the Arewacloud website that is not Arewacloud’s property remains the copyright of its respective owner/s. In no way does Arewacloud claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.