By Margeaux Perrin. block. Published at Tuesday, January 29th, 2019 - 18:56:27 PM.
The industrial sector has also caught on to this trend as concrete paving, specifically designed and manufactured with this segment of the market in mind, can easily handle heavy traffic such as trucks and cranes. Because of the low maintenance required, the total cost of paving is more affordable than tar over the long term.
Paving block is one of the material used as the top layer of road structure besides asphalt and concrete paving block is usually made of mixed material such as Portland cement or other adhesive material, water, and aggregate.
Once you have your materials you need to start work in your area. Make sure all debris and other materials are cleared and then begin to set your sub base. Your sub base will ideally be made of very fine gravel or preferably sand. You are going to want to set a sub base of roughly 70 mm deep so that your paving stones appear to be level with the ground but are also protected from the dirt underneath the sub base. This will also help with any drainage issues you may have with your block paving path.
From our series of previous articles, it is clear to see that there are many components that get into the building to make it complete. While each one of these have their different roles, they are put together concurrently. Planning is therefore very important to ensure that a harmonious process results. Moreover, the different components are usually put up by different contractors (service providers) thus it amplifies the need for proper planning.
Any content, trademark’s, or other material that might be found on the Arewacloud website that is not Arewacloud’s property remains the copyright of its respective owner/s. In no way does Arewacloud claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.