By Sibyla Navarro. block. Published at Saturday, January 19th, 2019 - 11:20:33 AM.
Once you have your materials you need to start work in your area. Make sure all debris and other materials are cleared and then begin to set your sub base. Your sub base will ideally be made of very fine gravel or preferably sand. You are going to want to set a sub base of roughly 70 mm deep so that your paving stones appear to be level with the ground but are also protected from the dirt underneath the sub base. This will also help with any drainage issues you may have with your block paving path.
From our series of previous articles, it is clear to see that there are many components that get into the building to make it complete. While each one of these have their different roles, they are put together concurrently. Planning is therefore very important to ensure that a harmonious process results. Moreover, the different components are usually put up by different contractors (service providers) thus it amplifies the need for proper planning.
Call in a paving professional to assist with the cleaning of the paving. While not recommended, consumers can use a diluted acid-based cleaning product, available from hardware stores. It is also extremely important to follow the chemical manufacturer’s instructions, specifically regarding the dilution. After using the acid-based dilution, wash it off thoroughly with water as quickly as possible in order to prevent damage to the pavers.
According to Bosun Brick, a leading manufacturer of pre-cast concrete pavers and kerbs, the selection of the correct product for your application is essential for the long term durability of the paved area.
Any content, trademark’s, or other material that might be found on the Arewacloud website that is not Arewacloud’s property remains the copyright of its respective owner/s. In no way does Arewacloud claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.