By Nicola Devaux. driveway. Published at Friday, February 01st, 2019 - 23:57:43 PM.
There are 2 methods you can employ as the bed for block paving, one, you have fully compacted sand making the sub base and the laying coarse much firmer, achieving a much flatter surface. To achieve this you need your sand approx 10 – 15mm higher than the finished screeding height, this surplus sand is screeded off to the correct height and then you lay your block paving.
You need a flat bed for your pavers to lay on, to do this you can use 18mm galvanised steel electrical conduit, they are not expensive but are better than using timber because the piece of timber or aluminum used to screed the sand will slide along them much easier.
When you go to choose your block paving, you will want to find a color that matches the rest of your house. The pavers who are professionals at paving will be able to give you ideas of what type of color should go in front of your home, and which one will stand out the most when it is placed in.
Meanwhile, brittle, deteriorating asphalt can form potholes, which can prove hazardous to drivers. Properly maintaining your driveway or parking lot area by sealcoating the asphalt will protect both your investment and the individuals who use the space.
Any content, trademark’s, or other material that might be found on the Arewacloud website that is not Arewacloud’s property remains the copyright of its respective owner/s. In no way does Arewacloud claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.